Rubicon Owners Forum banner

TJ Take off parts, Susp, fenders, etc.

4081 Views 27 Replies 15 Participants Last post by  normnutman
2004 TJ Jeep Take-off parts

Steel Gas Tank Skid (no body lift required) $150 Shipped Continental US.
I forgot to take a pic. PM me.



ORO U-Turn. Gen III kit with Gen Iv Solid drag link. Some rash on tie ord, but it is straight. $300 Shipped Continental US.


SOLD -

SOLD JKS ACOS Front 1.5-3.75" Rear 2.0-3.375" $125 per pair shipped Cont. US or $240 For both pairs shipped Cont. US - SOLD

SOLD -


SOLD - Full Traction Engine Skid. Modified to allow skid to be mounted BELOW the T-case skid. Scratches, No big dents $100 Shipped Cont. US SOLD



Rubicon Express 4.5" Springs Front Part Number RM6080/56878 Rear Part Number RM60110/58000
$200 all four Shipped Cont. US.

http://jaydub.smugmug.com/Other/Parts/IMG5805/1050515221_48zCx-M.jpg[img]
Full Traction Shocks Approx 3,500 miles No leaks, minor blemishes
Front: 19"-30.5"
Rear: 17"-27"
$100 all four Shipped Cont. US


[img]http://jaydub.smugmug.com/Other/Parts/IMG5810/1050516794_tAnkQ-M.jpg

Rear Shock relocation brackets. Rock rash and pieces of my axle mounts included $20 shipped cont. US.

TNT Rock Rails (sliders) with Rokment internal braces $250 Shipped Cont US
I forgot to take pictures. PM for pics

Sold Vanco TJ Big brake kit $550 SHipped Continental US. Slightly modified to fit ORO U-Turn. Will not impact ability to fit on TJ without ORO kit.
$550 Shipped Cont US. Pending SOLD


SOLD TNT Front Tube fenders with 4.5" flare (matches width of Factory Rubicon Fender flares).
Painted Light khaki metallic. This is a fully bolt on kit no cutting of factory front fenders.
Note - hood latches and all pieces shown on inner fenders will be removed prior to shipping. Shipping is at expense of buyer.
Paint was professionally done with uch care to clean up the ugly welds from TNT. There are some scratches.
$250 SOLD




See less See more
13
1 - 20 of 28 Posts
Hmmm, you've got several items I'm interested in, just need to figure out which one I want most, before it all gets gone...
:D
Jay, which Vanco kit is that, 15" or 16"? And what all is in the kit?
I'll take the front ACOS Jay. PM me your info and how you want payment sent. I have paypal if that helps
Are those fenders generation one or generation two.
Vanco TJ Big brake kit $550 SHipped Continental US. Slightly modified to fit ORO U-Turn. Will not impact ability to fit on TJ without ORO kit.
$550 Shipped Cont US.
What do you mean by slightly modified?
PM sent.
wsm04rubi said:
Jay, which Vanco kit is that, 15" or 16"? And what all is in the kit?
16" kit. Fits nicely in my 17" Walker Evans :D
gregert12 said:
Vanco TJ Big brake kit $550 SHipped Continental US. Slightly modified to fit ORO U-Turn. Will not impact ability to fit on TJ without ORO kit.
$550 Shipped Cont US.
What do you mean by slightly modified?
Had to grind one section about 1/16" to allow for the ORO U-turn brackets to be bolted up flush.
petehanegan said:
Are those fenders generation one or generation two.
No Idea. Is there a visible difference that I could look at to tell you? All I can say is they came to me with Ugly welds, but are hella strong. I cleaned up the welds alot, added a few extra welds on seems under neath that TNT did not woeld, then had them professionally finished with undercoat and paint.
JayDub said:
wsm04rubi said:
Jay, which Vanco kit is that, 15" or 16"? And what all is in the kit?
16" kit. Fits nicely in my 17" Walker Evans :D
Bummer, I've got 15" Walker Evans...
06moneypit said:
I'll take the front ACOS Jay. PM me your info and how you want payment sent. I have paypal if that helps
PM Sent
JayDub said:
petehanegan said:
Are those fenders generation one or generation two.
No Idea. Is there a visible difference that I could look at to tell you? All I can say is they came to me with Ugly welds, but are hella strong. I cleaned up the welds alot, added a few extra welds on seems under neath that TNT did not woeld, then had them professionally finished with undercoat and paint.
I'm not sure about visible differences. I rolled my jeep 3.5 times and one of mine got messed up I ordered a new pair a couple of weeks ago but my credit card hasn't been charged yet so if I can cancel my order I will buy yours. Will let you know tomorrow. I tried to order one fender from them and they told me mine were generation one and didn't make them any more.
Interested in the fenders, what would be the best way to ship? Looks like TNT does UPS. It would be a business address 63102 zip if you have dims/weights handy.

Thanks,
Chris
On the fenders, I am getting lots of interest. To be fair, I am giving dibs based on order of PMs and postings.

Current order Barrows > PeteHanegen > Lil Toe.

FYI - I did do some research and the fenders I have available are Gen I.
Acos still out there? They are about all I want for now.
Any idea if the engine shid will fit a TNT longarm?
Ok I am unable to get your fenders but thanks for holding them for me.
petehanegan said:
Ok I am unable to get your fenders but thanks for holding them for me.
Thanks Pete. I appreciate you letting me know. LilToe - fenders can be yours if you choose.
1 - 20 of 28 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top