Rubicon Owners Forum banner
1 - 13 of 13 Posts

·
Registered
2014 Wrangler Unlimited Rubicon
Joined
·
29 Posts
Discussion Starter · #1 ·
Ok, I've decided to get rid of the electronic disconnect sway bar and go with a solid one. So my question is what will actually fit a Rubicon since they never actually came with one?
 

·
Registered
2014 Wrangler Unlimited Rubicon
Joined
·
29 Posts
Discussion Starter · #3 ·

·
Registered
Joined
·
715 Posts
This would be the cheapest, add it to your existing. $106
Or engage your sway bar and disconnect it. then add whatever links you want.
 
  • Like
Reactions: johncanfield

·
Registered
2014 Wrangler Unlimited Rubicon
Joined
·
29 Posts
Discussion Starter · #5 ·
This would be the cheapest, add it to your existing. $106
Or engage your sway bar and disconnect it. then add whatever links you want.
Already have that, my problem is the internal linking gears are so worn the bar ends move a good 3-4 inches before the sway bar does anything.
 

·
Registered
Joined
·
715 Posts
The front ends of jk's are all the same so you just need a sway bar from a Sahara or sport, do you have any Pick-a-Parts near you?
 

·
Super Moderator
2004 AiRubicon
Joined
·
4,456 Posts
I was going to suggest a salvage yard, or put up some wanna buy threads in JK dedicated places.
Another option would be Ebay.
People part out totaled jeeps there all the time and the amount of parts on there is insane.
 

·
Registered
2014 Wrangler Unlimited Rubicon
Joined
·
29 Posts
Discussion Starter · #9 ·
I was going to suggest a salvage yard, or put up some wanna buy threads in JK dedicated places.
Another option would be Ebay.
People part out totaled jeeps there all the time and the amount of parts on there is insane.
Probably going Ebay route.
 

·
Premium Member
Joined
·
291 Posts
Check with some local 4x4 shops. A lot of people don't want the stock parts back when having upgrades installed. The shops by me hang on to them for cases like this.
 
1 - 13 of 13 Posts
Top