Rubicon Owners Forum banner

1 - 2 of 2 Posts
G

·
Guest
Joined
·
0 Posts
Discussion Starter #1
Okay,

After reading the directions on my Daystar spacer lift kit, I think there must be a more simplified way to install this kit? Anyone with experience please forward feedback on this endeavor.

Thanks,
Roy
 

·
Premium Member
Joined
·
4,195 Posts
OK, heres my simple version...without shocks

1. Lift vehicle up
2. Find somthing to support axel (front or rear whichever your doing first)
3. Take Tires off(which every your doing first)
4. Take sway bar off (rear or front) rear has rubber band type thing(lol)
5. Push down slightly and remove spring (left or right side whichever your doing first
6. Replace bump stops
7. Insert spacers then springs (PITA)
8. Ensure spring is seated properly
9. replace sway bar back.
10 Replace tires

My spacers didnt come with shocks..i used daystar too.
Pete
 
1 - 2 of 2 Posts
Top