Ted_D said:
With the rig off and the key on, you can hear the locker pumps turn on. If not, jack up the axle and after locking the switch, both tires should spin in the same direction. If not, then it did not work.
Best of luck
Rubicon Locker Mod
I just did the Mod on my Rubicon. How can I tell that it is working? I have pins 1 and 4 on the toggle. I thought the front and rear locker lights would come on but they are not.
http://www.wanderingtrail.com/Mods/TJLJ ... Defeat.htm
http://www.wanderingtrail.com/Mods/TJLJ ... Defeat.htm
1 - 5 of 5 Posts
With the rig off and the key on, you can hear the locker pumps turn on. If not, jack up the axle and after locking the switch, both tires should spin in the same direction. If not, then it did not work.
Best of luck
They will if it is working, when you hit the toggle, you still need to hit the locker switch on the dash, the toggle only bypasses the saftey lock-out. I did the same thing, the 4HI locked is awsome in deep snow. Good luckTed_D said:I just did the Mod on my Rubicon. How can I tell that it is working? I have pins 1 and 4 on the toggle. I thought the front and rear locker lights would come on but they are not.
I have been playing with it for a few hours. My wire colors are different from the instruction I have found online. I cant hear the pump kick on or get the lights to work in high. Thought I would try it as we are headed to the mountains to have some fun in the 3+feet of snow
Got it...bad switch.... thanks!
1 - 5 of 5 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Rubicon Owners Forum
A forum community dedicated to Jeep Wrangler Rubicon owners and enthusiasts. Come join the discussion about performance, modifications, classifieds, troubleshooting, maintenance, and more!
Full Forum Listing
Recommended Communities
