Rubicon Owners Forum banner

Rokmen Control Arms

1205 Views 4 Replies 5 Participants Last post by  gregert12
hey guys, got the front and rear lowers on this weekend. doing a little bit at a time, due to trying to finish up my house stuff as well. but are the uppers going to be just as easy as the lowers. Basically put it up on jack stands, removed the wheels and disconnected the lower shock bolts. then just zipped off the old control arms and installed the new ones, (piece of cake)

what else if anything will have to be done while installing the uppers??
1 - 5 of 5 Posts
It can be a pain with the track bar connected, mine were anyways. Just take your time and it'll ome together.
Pics are always welcome
I used a ratchet strap on the bumper and axle to rotate the pinion as needed.
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top