Rubicon Owners Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
152 Posts
Discussion Starter · #1 ·
I've had a slight leak in my oil cooler housing but was holding off for the new Dorman metal housing. Got an email from Rock Auto last week that the part was in stock so I ordered one along with a new Mopar assembly so all the parts would be new.
I used the Mopar oil cap/filter, cooler (and screws) and sensors. The Dorman unit came with new gaskets and mounting screws.

I'll do my best to follow up as I put some miles on the unit.






















 

·
Moderator
Joined
·
3,759 Posts
Do you mind posting up part numbers and/or links? Looks like a good piece
 
  • Like
Reactions: Blue Baby Sound

·
Registered
Joined
·
152 Posts
Discussion Starter · #4 ·
The Dorman housing is 926-876. The housing comes with new O rings, cooler gaskets, mounting screws, upper and lower intake gaskets. The Dorman housing requires you re-use your sensors, oil cap, oil cooler and screws. However if you want all new parts you'll also need to order a new Mopar housing to rob the parts from. (At the time of this writing the parts aren't available separately)
  • 2012-2013 The factory housing parts will not work on the Dorman housing, you'll need to order a 2014-2016 oil cooler housing. You will now use the 2014+ oil filter. (I have no experience doing this, just what my research has shown)
  • 2014-2016 Mopar housing number (as of 08-2021) is 68105583AG
  • 2017-2018 (JK) Mopar housing number (as of 08-2021) is 68310865AB
Hope that helps (y)
 

·
Sarcastic Moderator
Joined
·
14,275 Posts
Nice thanks
 
1 - 5 of 5 Posts
Top