Rubicon Owners Forum banner

Fixing my mistake

787 Views 2 Replies 2 Participants Last post by  RubiconMike26
I made the mistake of buying control arms with poly bushings. They are made by Full Traction. does any body know if the factory rubber bushing would be able to replace the poly's. If not will the currie rubber bushings or hell anything that is not poly go in there. The squeeking is driving me insane. Thanks
1 - 3 of 3 Posts
FT has/had a warranty on the bushings since there was a bad batch that only lasted 10k miles. You can also upgrade to the heim joint from FT and be done with it.
My heim joints are great still, it's just the poly that I was having a problem with. I talked with dave from you know where and he said they (not sure who "They" are) coming up with a solution for this problem.
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.