Rubicon Owners Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
45 Posts
That looks like your shocks were too short and was pulled off its mounts. You should probably check your shock lengths when fully extended to make sure that they match your suspension travel first.
 

·
Premium Member
Joined
·
322 Posts
Discussion Starter #4
Well the main reason that that happened is that i was wheelin and got high centered and got on the skinny to much and ramed a stump and spit out the coil and riped the shock out and now i am guessing that it didnt have very much threds left.The shock are plenty long they are for 6'' of lift.
 

·
Registered
Joined
·
45 Posts
Oh, ok. Maybe try JKS bar pin eliminators. They seem to be a good upgrade from the normal bar pins as they help with rattle and seem much stronger.
 

·
Premium Member
Joined
·
765 Posts
[quote='05TJLWBRUBY]If you have the means, outboard it and be done with it.

Best of Luck,

Mike[/quote]

What is the advantage of out boarding the shocks? Is this something that you just do to the rear shock or to all 4?
 
1 - 8 of 8 Posts
Top