Joined
·
3 Posts
i'm looking to do a simple front bumper, just out of chanle iron. what size iron? and what Diamiter holes @ what spacing?
bubba bumper?
1 - 6 of 6 Posts
Joined
·
1,024 Posts
Chop the ears off the stock at the edge of the frame, done.
Joined
·
3 Posts
REALLY? THAT SIMPLE? GEE I FEL A LITTLE...... I WANT TO DO A LITTLE MORE WITH IT THEN JUST STUBBY IT. LIKE EITHER A STINGER OR AT LEAST TUBE IN AND AROUND MY FOG LIGHT SO I DONT KEEP GOING THRU A SET EVERYTIME I'M OUT. THANKS.
mud addict,
Instead of angle iron, you maybe better off with 2x4 C channel so you can bolt it to the top just like the stock bumper and below the frame for more strength.
The holes and spacing I do not know but you can easily use the stock bumper as a template.
Instead of angle iron, you maybe better off with 2x4 C channel so you can bolt it to the top just like the stock bumper and below the frame for more strength.
The holes and spacing I do not know but you can easily use the stock bumper as a template.
Joined
·
3 Posts
ok, so 2 x 4 iron, then just magic marker dots to line up the holes from stock bumper. just would have thought someone templated this already.mud addict said:
did anyone catch the proto type J8 rear bumper? next on the list of Bubbu Fab.
1 - 6 of 6 Posts
Join the discussion
