bbusch’s LS3 TJR build.. next project => paint and restoration
501 - 520 of 550 Posts
Joined
·
3,432 Posts
getting close…
![Motor vehicle Automotive tire Tread Automotive design Sports equipment]()
![Vehicle Hood Automotive tire Motor vehicle Sports equipment]()
![Hood Motor vehicle Car Automotive design Vehicle]()
A/C lines getting built this coming week and hopefully I‘ll get the bracket for the PPW welded on the driver‘s side hoop without issue. I put some Blue Devil rear main seal repair in the oil as a temporary solution to the minor rear main leak. We think it’s coming from the upper seal passenger side (just above the oil pan) not the rear main seal itself but I’ll give this stuff a try anyway and see if it stops. I’ll address the issue after I paint the car.
A/C lines getting built this coming week and hopefully I‘ll get the bracket for the PPW welded on the driver‘s side hoop without issue. I put some Blue Devil rear main seal repair in the oil as a temporary solution to the minor rear main leak. We think it’s coming from the upper seal passenger side (just above the oil pan) not the rear main seal itself but I’ll give this stuff a try anyway and see if it stops. I’ll address the issue after I paint the car.
Joined
·
3,432 Posts
I ended up deciding on a GM color. It’s black with silver in it and it will set this Jeep off. 6-8 weeks is estimated time to complete the job.
Joined
·
12,323 Posts
I always want to incorporate a spray booth in my shop but not enough room 
Joined
·
4,016 Posts
You can buy portable, inflatable paint booths. Then you don't have to have a permanent space dedicated to paint.I always want to incorporate a spray booth in my shop but not enough room
Joined
·
3,432 Posts
notice there is no hood in any of the shots…It is one color
I am sad.
501 - 520 of 550 Posts
