Rubicon Owners Forum banner
1 - 20 of 41 Posts

· Premium Member
Joined
·
3,303 Posts
Re: bbusch's TJR build.. Complete new interior!

Looking good

I'd send ya my stock pitman arm, but it seems to really like my stock steering box. I'll try and remove it again this weekend, if it comes off it's yours.
 

· Premium Member
Joined
·
3,303 Posts
Re: bbusch's TJR build.. Complete new interior!

Looked at the seats, and thinking you were right. They use the stock holes in the lower frame and just put spacers and studs to hold the seats in place. Really quite simple, you can see it in the MC web site... So i figured no reason for measurements.

On the pitman arm, it's still lodged on the box. That and I forgot and feel stupid I forgot, but it's partially drilled out for a 5/8 heim.


So, looking forward to seeing what you end up with.
 

· Premium Member
Joined
·
3,303 Posts
Interesting, I have these bead locks. They just had the hole for the TPMS monitor in the insert, nothing installed. So that sucks that your installer had this issue.

I also just used some BBs to balance the tires, so far so good. No apparent balance issues.

Sucks for another delay.
 

· Premium Member
Joined
·
3,303 Posts
You have not been having good luck on your jeeps lately. Sorry

I'll take one of the off your hands, I'll be heading out west soon to get my car fixed. Worse issues with it than yours combines.

Might try to pick up an LJ on the way back.
 
1 - 20 of 41 Posts
Top