Rubicon Owners Forum banner

any o/t vendors have stiffer springs and stronger controlarm

892 Views 2 Replies 2 Participants Last post by  Phillip
any of the vendors that can sell my stiffer springs that i can race with ?

i currently use the RE 4.5" springs on the JK 2 door but they are to soft and the dynatrac D60 keep hitting the bumpstops .
the JK weights fully loaded 2500 kg or 5500 lbs and i currently have fox adjuseble shocks

also have a problem with the JK RE upper and lower arm , the rubber bushings only last a few days and the are gone .
1 - 3 of 3 Posts
could a admin move this to the JK vendor forum please
Check with Northridge 4x4. Have David get you a set of Currie control arms with Johnny Joints on both ends, and Currie progressive springs.
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.