|Topic Review (Newest First)|
|08-15-2019 01:56 PM|
Originally Posted by johncanfield View Post
|08-15-2019 09:35 AM|
|aeroshots||Good news on the brakes. My buddy at Napa will be glad to hear. He is so much more than just a parts guy. He retires in January after being in the parts business since a teenager in his dad's store.|
|08-15-2019 08:24 AM|
|johncanfield||You need one of those "help I've fallen and I can't get up" clickers .|
|08-15-2019 05:10 AM|
The Jeep made another uneventful trip yesterday and it was hot and I made sure to use the brakes. The Jeep also had a good load in it; 400 pounds of animal feed, my groceries for a month and my big arse.
I am almost ready to say the brakes are fixed. I will still wait to put the new rotors on, it's too hot outside. No sense getting a heat stroke. If I did, no one would be around to help, and then after a few days the dogs would start thinking I smell good, then they would say to themselves; "Oh Dad smells good! I don't think he'll miss a couple fingers." The next day it'll be a hand, and you get the idea. LOL
|07-14-2019 05:11 PM|
Two more uneventful trips in the Jeep. I am almost tempted to put the new rotors on, but I'll wait till summers over, around October. LOL
It looks like the new pistons did the trick Phil!
I wish I had known the pistons were phenolic when this all started. I would have been on it like white on rice. LOL
When I put the rotors on I will go ahead and rebuild the rear with the new pistons and seals even though they have caused no problem.
I guess when I hauled my loaded trailer moving from Clearwater to here it put excessive heat on the phenolic pistons since my issue began after the move.
Thanks again Phil!
|07-14-2019 03:54 PM|
I feel ya, I just changed out both front calipers on my 06 since they were stuck and dragging after about 4 miles.... drivers worse than pass, but both hung up.
I would say a couple things
first, I had divots in both brackets on this vehicle, driver side was deep, passenger side not so bad. I removed them both and lubed to keep the pads from hanging, and reduce the corrosion that forms, which brings me to my second observation,
this Jeep sits for extended periods days, weeks sometimes months since I have an excess of vehicles. The parts sit in one position and normal condensation, humidity etc, generates corrosion on wear areas like caliper slides, inside piston bores etc. . Other than being deliberate about lubing things and preventing corrosion, which is almost impossible I need to make a point to drive this vehicle more. Moving parts don't corrode, or at least not as easily.
|07-14-2019 09:43 AM|
Sorry I read thru all the posts and didn't catch it, but what brakes are dragging... front, rears or all 4.
If all 4 are dragging the first thing I would check is that the master cylinder is not over filled. The brakes get hot and the fluid expands it needs somewhere to go. If the master is overfilled there is no room for expansion and the system will remain pressurized. Also this condition should get worse as the brakes get hotter and should get better once cooled down.
The brake fluid return port in the master cylinder could be getting blocked. This could be due to an internal issue with the master cylinder itself or a binding issue within the booster.
If you can drive it enough to duplicate the concern and all the brakes are dragging, try loosening the master from the booster and see if the condition goes away.
|07-05-2019 11:34 AM|
Originally Posted by johncanfield View Post
I guess I'll have to win the lottery twice, but I still need to get to Florida to purchase the tickets. LOL
|07-05-2019 08:44 AM|
What Chris said .
Our rural area is growing - people are moving in from the Left coast and even nearby cities. Raw land around us in going for as much as $8-10K per acre, if you have live water (spring, creek, etc) the price can double/triple/quadruple? Our little nearby town now has a Family Dollar and a new Mexican restaurant but we haven't made the big time yet - there's no stop lights.
While we love living out here, it's a 40 to 50 mile round trip to the grocery stores and major big city shopping is a 150 mile round trip.
|07-04-2019 03:43 PM|
Originally Posted by Wildrat View Post
Most of those places are well and septic system. there are lots of trees. Juniper, cedar, mesquite etc. If they dont have a walmart they'll have a HEB which is better. And yes typically all mail services deliver.
|This thread has more than 10 replies. Click here to review the whole thread.|