Join Date: Mar 2016
Location: Sunnyvale, CA/Knoxville, TN
The lowest setting is blowing at the 2nd setting speed. That heat blowing on my throttle foot all the time sucks! All other settings (2-4) work as they should.
I'm thinking resistor but I'm second guessing myself on the switch.
Imagine the lowest resistor setting blew and now it's running off the next resistor setting …. regardless of switch position. Does that make any sense?
Any experience with this?
Recap: Low speed setting blows at second speed level. All other settings good.
That's what mine did. Bought a replacement resistor at NAPA for $19 and it's all good. Been about 4 years since mine went bad.
2006 LJ Rubicon
Dirtworx rear bumper/tire carrier
Barricade front bumper
Badlands 12K winch
6- round LED lights (4)
Rough Country hood prop
Cobra 75WXST CB
7-way trailer connection w/brake controller
Powerstop slotted and drilled front brake kit
Superior chromoly front and rear axles
Iron Rock 6" L/A lift
Doetsch Tech and Pro Comp shocks
Iron Rock Over the Knuckle Steering
35" Nanking Mudders
XD wheels, 16x8
Motive Gear 4.88 gears