OBD Codes - Rubicon Owners Forum
 9Likes
  • 1 Post By Stinger
  • 2 Post By mariodesmo
  • 1 Post By rlenglish
  • 1 Post By rlenglish
  • 4 Post By BobsLJ
 
LinkBack Thread Tools
post #1 of 8 (permalink) Old 07-27-2019, 02:17 PM Thread Starter
RubiconOwnersForum.com Premium
 
Stinger's Avatar
 
Join Date: Jun 2005
Location: Sisters, Oregon
Posts: 5,182
Garage
OBD Codes

Well I had to replace my rear posi. Just couldn't take the power of the engine anymore. Pulled on to the highway headed back to camp and "slightly" got on it to merge into traffic. Well that didn't go so well and now I have an ARB in the back. Seems to work well or at least as well as I can tell.

Now that's the problem. I am now throwing three codes: P0700, P0182E and 1915. All are related to the transmission.
While I was waiting for the ARB to get here I shortened a couple of wiring harnesses. I have gone back several times and checked the wiring to make sure everything was where it is supposed to be but No luck finding the problem.

Anyone out there got any suggestions? Remember I am running a 6.0 liter Chevy engine with a 6L90 tranny.
Mouse likes this.

Frank!
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

05 Rubicon LJ #009 Sahara slightly modified
Stinger is offline  
Sponsored Links
Advertisement
 
post #2 of 8 (permalink) Old 07-27-2019, 03:50 PM
RubiconOwnersForum.com Premium
 
mariodesmo's Avatar
 
Join Date: Sep 2007
Location: SF Bay Area
Posts: 2,456
Send a message via MSN to mariodesmo
Those codes are transmission control related, mostly. Assuming that only a section of wire has been cut out, I would check them it see if there are any components in the wiring taken out.

Maybe there are/is a small component connected (e.g. resistor/capacitor network) to one or more of the wires that influences the signal to the PCM??? It could be small, and hidden by loom or tape, and not noticed easily. Just a guess, but I would take a close look at the wiring that came out and check for continuity of each wire to see if it is zero ohms, end to end, and wire only. Or if there is something else there.
Stinger and FLLJ like this.

'02 TJ Sport, ARB's, 4.88s, NV241, Nth 6in LA, D44's, 35in KM2's, rear discs, Antirocks,
Warn XD9000i, Superior Evolution, and caught fire only once, N7YMZ
mariodesmo is offline  
post #3 of 8 (permalink) Old 07-27-2019, 09:23 PM
Rubicus Maximus
 
Join Date: Mar 2017
Location: B.C. Canada
Posts: 462
I agree, inspect the cut out sections first. I assume the wiring you shortened was transmission related?
These codes relate to your trans range sensor so even if you had a cold solder then it would be enough to cause a problem.
If you clear the codes do they come back right away? Your trans connections are clean and tight? Don't these 6L90's have a problem of cracking the boards in the range sensors. Moving the harness might have been the last straw?
Stinger likes this.

2014 JKU, JKS lift,Poison spyder flares, bombshell covers,Rancho D2 control arms, JKS adjustable track bars, 35" Tires. GrabBars, Crawler Conceptz rear bumper, Smitty front bumper, Winch. Rough Country inner fenders, Teraflex Disco Mud Flaps
Backseat Dobermann Security
rlenglish is offline  
post #4 of 8 (permalink) Old 08-03-2019, 03:24 PM Thread Starter
RubiconOwnersForum.com Premium
 
Stinger's Avatar
 
Join Date: Jun 2005
Location: Sisters, Oregon
Posts: 5,182
Garage
All cut sections have been inspected. No problems found.

Any other suggestions?

Frank!
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

05 Rubicon LJ #009 Sahara slightly modified
Stinger is offline  
post #5 of 8 (permalink) Old 08-03-2019, 06:02 PM
Rubicus Maximus
 
Join Date: Mar 2017
Location: B.C. Canada
Posts: 462
https://www.autocodes.com/p182e_gmc.html
If you run a search on your code and whatever your donor vehicle was you should be able to find some help.
If your wiring is good then you should be able to check your range sensor with a multi meter.
FLLJ likes this.

2014 JKU, JKS lift,Poison spyder flares, bombshell covers,Rancho D2 control arms, JKS adjustable track bars, 35" Tires. GrabBars, Crawler Conceptz rear bumper, Smitty front bumper, Winch. Rough Country inner fenders, Teraflex Disco Mud Flaps
Backseat Dobermann Security
rlenglish is offline  
post #6 of 8 (permalink) Old 08-04-2019, 01:11 AM Thread Starter
RubiconOwnersForum.com Premium
 
Stinger's Avatar
 
Join Date: Jun 2005
Location: Sisters, Oregon
Posts: 5,182
Garage
Quote:
Originally Posted by rlenglish View Post
https://www.autocodes.com/p182e_gmc.html
If you run a search on your code and whatever your donor vehicle was you should be able to find some help.
If your wiring is good then you should be able to check your range sensor with a multi meter.
Tried that. No help. The only thing i can possibly think of is the ECU got fried when i cut the wiring looms.

Frank!
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

05 Rubicon LJ #009 Sahara slightly modified
Stinger is offline  
post #7 of 8 (permalink) Old 08-04-2019, 11:36 AM
Rubicus Maximus
 
Join Date: Mar 2017
Location: B.C. Canada
Posts: 462
Does your scanner show trs data?

2014 JKU, JKS lift,Poison spyder flares, bombshell covers,Rancho D2 control arms, JKS adjustable track bars, 35" Tires. GrabBars, Crawler Conceptz rear bumper, Smitty front bumper, Winch. Rough Country inner fenders, Teraflex Disco Mud Flaps
Backseat Dobermann Security
rlenglish is offline  
post #8 of 8 (permalink) Old 08-04-2019, 01:09 PM
RubiconOwnersForum.com Premium
 
BobsLJ's Avatar
 
Join Date: Apr 2012
Location: Palm Desert, CA
Posts: 1,537
Garage
Where did the installer pull the power for the arb on/off switch? Did you have an ARB compressor before? Maybe something is messed up with the compressor/switch circuit?
Yes, I realize your codes are tranny related, however with all the electrical crud you never know what changed can effect other stuff.

2006 Turbo LJ Rubicon, Red
BobsLJ is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Rubicon Owners Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome